26/03/2024, 08:10 PM
The 100Mbps throughput may be Ethernet connection dropping to 100Mbps. If the <--> icon is still present on the secondary node when the speed drops, try unplugging its Ethernet cable temporarily. If the connection drops, then it's still using the Ethernet cable, but with a 100Mbps connection rate. I'm not sure if there is a way to force Ethernet backhaul as the MW6 I have only switches during a power cycle.
I suggest try different Ethernet cables just to rule out a bad Ethernet cable, particularly if it's an old cable that may have dirty or corroded connector pins.
I suggest try different Ethernet cables just to rule out a bad Ethernet cable, particularly if it's an old cable that may have dirty or corroded connector pins.