I installed according to this diagram.
![[Image: attachment.php?aid=342]](https://confusedbird.com/attachment.php?aid=342)
Everything works, signal between rooms is good and shows status as wired. I have 6 nodes, total about 40 devices connected at the same time. However, the wifi speed is very slow (15~30Mbs). I have checked and most of devices are connected to 2.4Ghz. Sometimes my device (but very rarely) connect to the 5Ghz and I test the speed is good (more than 300Mbs).
Can I ask if there is a way to turn off the 2.4Ghz or prioritize connecting to the 5Ghz? My room is large and not separated by walls but cannot connect to 5Ghz.
Here is my Tenda configuration:
- DHCP: Enabled
- Qos: Enabled
- Fast roaming: Enabled
- Capacity-Oriented Mode: Enable
Everything works, signal between rooms is good and shows status as wired. I have 6 nodes, total about 40 devices connected at the same time. However, the wifi speed is very slow (15~30Mbs). I have checked and most of devices are connected to 2.4Ghz. Sometimes my device (but very rarely) connect to the 5Ghz and I test the speed is good (more than 300Mbs).
Can I ask if there is a way to turn off the 2.4Ghz or prioritize connecting to the 5Ghz? My room is large and not separated by walls but cannot connect to 5Ghz.
Here is my Tenda configuration:
- DHCP: Enabled
- Qos: Enabled
- Fast roaming: Enabled
- Capacity-Oriented Mode: Enable